Advertisement
Step 4: Side Wall Assembly
Part 2
C: Place 1 (042) End Floor Support at each end of the assembly so they are flush to the (024) Floor Support
Longs. Attach each (042) End Floor Support using 6 (S3) #8 x 2 -1/2" Wood Screws per board as shown in fig.
4.3 and 4.5.
D: Place 1 (024) Floor Support Long lengthwise through the center of the assembly so each end lines up with the pre-
drilled holes in (042) End Floor Supports. Attach (024) Floor Support Long using 4 (S3) #8 x 2 -1/2" Wood Screws. (fig.
4.3 and fig. 4.4)
Fig. 4.3
022
Fig. 4.4
024
Wood Parts
1 x
Floor Support Long 1-1/4 x 3 x 74-3/8"
024
2 x
End Floor Support 1-1/4 x 3 x 44"
042
022
Flush
042
Flush
x 4
S3
042
024
Fig. 4.5
024
023
Hardware
16 x
#8 x 2-1/2" Wood Screw
S3
19
023
Flush
042
042
S3
x 6 per board
Advertisement
