KidKraft HIGHLINE RETREAT Installation And Operating Instructions Manual page 18

Step 4: Side Wall Assembly
Part 1
A: With a helper hold Front and Back Wall Assemblies in position as shown in fig. 4.1.
B: Place 1 (041) Lower Side across the bottom of each end and attach using 2 (H15) 1/4 x 3- 3/4" Hex Bolts (with
lock washer, flat washer and t-nut) and 2 (S20) #8 x 1 -3/8" Wood Screws per board making sure that the assembly is
square. (fig. 4.1 and fig. 4.2)
Fig. 4.1
Back Wall Assembly
Wood Parts
2 x Lower Side 5/8 x 4-1/2 x 47-3/4"
041
Front Wall Assembly
022
041
Fig. 4.2
1/4"
T-Nut
041
S20
1/4" Lock
1/4" Flat
Washer
Washer
Hardware
4 x 1/4 x 3-3/4" Hex Bolts
H15
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
4 x #8 x 1-3/8" Wood Screw
S20
18
023
041
x 2 per board
x 2 per board
H15