Advertisement
Step 12: Attach Access Ladder to Deck
A: Place Access Ladder against (042) End Floor Support so that it's centered in the opening and flush to the
top of the board. Pre-drill using a 1/8"drill bit and attach using 2 (LS2) 1/4 x 2-1/2" Hex Lag Screw (with 1/4" Flat
Washer). (fig. 12.1 and fig. 12.2)
Fig. 12.1
1/4" Flat
Washer
LS2
042
1/4" Flat
Washer
LS2
Access Ladder Assembly
Hardware
2 x
1/4 x 2-1/2" Hex Lag Screw (with 1/4" Flat Washer)
LS2
36
Fig. 12.2
Access Ladder Assembly
LS2
1/4" Flat Washer
042
Flush
Advertisement
