INITIAL SETUP AND CONFIGURATION
Setting up a DHCP server
Konftel 800 supports any DHCP server software as long as the software is
correctly configured.
Contact your server software vendor to obtain server software installation and
configuration instructions.
Install the DHCP server software according to the server software vendor's
instructions.
Configure the IP address for the phone.
You must configure the required DHCP options to connect to the network with
DHCP.
Related concepts
Network settings description
Connecting to a network with DHCP
Use this procedure to connect to a network with DHCP from your phone or
through the web interface.
•
To connect to the network with DHCP from Konftel 800, do the following:
a) Log in as the administrator.
b) Tap
Network
c) Enable
DHCP
d) Tap the
icon twice to return to the home screen.
The phone reboots.
•
To connect to the network with DHCP through the web interface, do the
following:
a) On the web interface, click
b) Enable
DHCP
c) Click
.
Save
The phone reboots.
Viewing the IP address
Use this procedure to view the IP address of your Konftel 800. You can use this
address to log into the web interface of the conference phone and manage the
settings in the device through the web browser.
On the phone screen, tap
on page 31
.
.
Network
.
Settings
.
.
19