Figure 10: Inserting I/O Module (Example); Figure 11: Snap The I/O Module Into Place (Example) - WAGO 750-637 Series Manual

Incremental encoder interfaces

Hide thumbs Also See for 750-637 Series:

Table of Contents

WAGO I/O System 750

750-637 Incremental Encoder Interfaces

Figure 10: Inserting I/O Module (Example)

Press the I/O module into the assembly until the I/O module snaps into the

carrier rail.

Check that the I/O module is seated securely on the carrier rail and in the

assembly. The I/O module must not be inserted crooked or askew.

Once the I/O module has snapped into place, the electrical connections for the

data contacts and power contacts (if any) to the head station or to the preceding

and, if applicable, following I/O module are established.

Public

Mounting

Manual

Version 1.6.1

Table of Contents

Table of Contents

750-637750-637/000-001 750-637/000-002 750-637/000-003 750-637/000-004