Photon Focus MV0 3D06 Series User Manual page 95

Cleaning of the housing
To clean the surface of the camera housing:
• Before cleaning disconnect the camera from camera power supply and I/O
connectors.
• Do not use aggressive solvents or thinners which can damage the surface,
the serial number label and electronic parts.
• Avoid the generation of ESD during cleaning.
• Take only a small amount of detergent to clean the camera body. Keep in
mind that the camera body complies to the IP40 standard.
• Make sure the detergent has evaporated after cleaning before reconnect-
ing the camera to the power supply.
Cooling
For long life and high accuracy operation, we highly recommend to mount the
camera thermally coupled, so that the mounting acts as a heat sink.
MAN083 08/2020 V1.2
14.1 IMPORTANT NOTICE!
95 of 129