Photon Focus MV0 3D06 Series User Manual page 87

Status bits Parameter
STAT[31:0] CNT_0
STAT[63:32] CNT_1
STAT[95:64] CNT_2
STAT[127:96] CNT_3
STAT[159:128] ENC_POS
STAT[160:160] M_TRIG_LEVEL
STAT[192] MOV_ROI_COL_WARN
STAT[193] MOV_ROI_BORDER
STAT[194] MOV_ROI_LASER_FINDER
STAT[206:196] PEAK0_ROI_Y
STAT[234:224] MOV_ROI_MIN_POS
STAT[250:240] MOV_ROI_MAX_POS
STAT[257:256] ALGORITHM_3D
STAT[303:288] TYPE_CODE
STAT[351:320] SN_NUMBER
STAT[383:352] CUSTOM_0
STAT[415:384] CUSTOM_1
Table 13.2: Status fields
MAN083 08/2020 V1.2
13.6 Status Line and Image Information
Description
Counter 0 Value (see Section 5.1)
Counter 1 Value (see Section 5.1)
Counter 2 Value (see Section 5.1)
Counter 3 Value (see Section 5.1)
Encoder position (Not available in this camera)
Line Input Level
Applies to moving ROI only: value 0: there are
more columns with a detected laser line than
specified in Peak0_MovingROIMinCol. Value 1:
there are less columns with a detected laser
line than specified in Peak0_MovingROIMinCol.
(Not available in this camera)
Applies to moving ROI only: value 1: the
distance from the mimimum or maximum
coordinate to the corresponding image border
is less than specified by
Peak0_MovingROIMinDistance. This is an indication
that perhaps the height of 3D-ROI is too small
for the current situation. (Not available in this
camera)
Applies to moving ROI only: value 1: the
current frame is a laser finder window. (Not
available in this camera)
Vertical starting position of the current 3D ROI.
This information might be useful for moving
ROI.
Applies to moving ROI only: minimal position
of laser line in current image. (Not available in
this camera)
Applies to moving ROI only: maximal position
of laser line in current image. (Not available in
this camera)
The algorithm that produced the 3D data. 1:
LineFinder, 2: COG.
Camera Type Code (see Table 13.3)
Camera Serial Number
Custom value 0: value of register
StatusLineCustomValue0 that can be set by the
user
Custom value 1: value of register
StatusLineCustomValue1 that can be set by the
user
87 of 129