Counter Event Source - Photon Focus MV0 3D06 Series User Manual

Counter Trigger Source
The counter reset source can be set to the counter end signal of the same
counter. This allows to restart the counter automatically as soon as it arrives
its end condition.
The current counter value at the time, when the reset is performed, is stored to the
CounterValueAtReset property, which can be read out by software.

5.1.5 Counter Event Source

The counter event source selects the signal event, which will be the used to increment the
counter. The following signal sources are available:
Off Counter is idle or has been stopped temporarely and doesn't count any events.
Acquisition Trigger Counts the number of acquisition triggers.
Acquisition Start Counts the number of acquisition start events.
Acquisition End Counts the number of acquisition end events.
FrameTrigger Counts the number of frame triggers.
Frame Start Counts the number of frame start events.
Frame End Counts the number of frame end events.
Frame Burst Start Counts the number of frame burst start events.
Frame Burst End Counts the number of frame burst end events.
Exposure Start Counts the number of exposure start events.
Exposure End Counts the number of exposure end events.
Counter 0 ... 3 Start Counts the number of the chosen counter start events.
Counter 0 ... 3 End Counts the number of the chosen counter end events.
Timer 0 ... 3 Start Counts the number of the chosen timer start events.
Timer 0 ... 3 End Counts the number of the chosen timer end events.
Encoder Counts the number of the encoder trigger events.
Action 0 ... 3 Counts the number of the chosen action signal events.
Software Signal Pulse 0 ... 7 Counts the number of the chosen software signal pulse events
(see Section 4.7).
Line Input Counts the number of transitions on the line input according to the signal input
activation configuration.
MissedAcqStartTrigger Count the number of missed acquisition start triggers. A missed
acquisition start trigger event is generated, when a acquisition start trigger cannot be
processed.
MissedFrameStartTrigger Count the number of missed frame start triggers. A missed frame
start trigger event is generated, when a frame start trigger cannot be processed.
MAN083 08/2020 V1.2
Off The state of the counter changes to "trigger wait".
5.1 Counter
41 of 129