Image Format Control; Region Of Interest (Roi) In 2Donly Mode; Region Of Interest (Roi) In 3D Modes - Photon Focus MV0 3D06 Series User Manual

Image Format Control

The focus on the interesting parts of an image can be set by setting the region of interest (ROI)
(see Section 10.2).
The ROI influences the image size which leads into an increased frame rate (see Chapter 11 for
more information about the available frame rate).

10.1 Region of Interest (ROI) in 2Donly mode

Some applications do not need full image resolution. The image size can be reduced by setting
the horizontal image offset (Offset X) and the image width (Width) and by setting the vertical
image offset (OffsetY) and image height (Height). A region of interest can be almost any
rectangular window but it must be placed within the sensor area. OffsetX + Width must not
exceed the sensor width and OffsetY + Height must not exceed sensor height.
The ROI OffsetX and Width must be a multiple of 8 in the D2048x1088-C01 and
the D2048-C01 cameras.

10.2 Region of Interest (ROI) in 3D modes

In the 3D modes, the ROI is determined by th3e following properties: OffsetX, Width,
Peak0_3DY and Peak0_3DH.
The minimal height of the laser triangulation region is 11.
MAN083 08/2020 V1.2
10
59 of 129