Table of Contents
Advertisement
Installation Instructions
Line-in jack, Microphone-in jack and Speaker-out jack
The Line-in jack can be connected to devices such as a cassette or minidisc player to
playback or record. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker-out jack allows you to connect speakers or headphones for audio output
from the internal amplifier.
6-Channel Audio(available on -6A mainboard)
This mainboard utilizes ALC655 chip providing 6-channel Audio, which consists of Front Left,
Front Right, Rear Left, Rear Right, Center and Woofer for a complete surround sound effect.
When 6-Channel audio is available, the front Left&Right jack can be connected to the Front
speskers, the Back Left&Right jack can be connected to the rear speakers and the
Center&Woofer jack can be connected to the center speaker and woofer.
Microphone function is offered by F_AUDIO Connector on the mainboard now.
If set 2-Channel Audio mode on -6A or -6AL mainboard, you can connect two speakers to the
Front Left&Right jack, at the same time use the Rear Left&Right jack as Line in jack, and use
the Center&Woofer jack as Microphone in jack.
8-Channel Audio(available on -8A mainboard)
This mainboard utilizes ALC880 chip providing 8-channel Audio, which consists of Line in,
Front speaker out,Mic in, Side speaker out, Rear speaker out, Center&SubWoofer speaker out
for a complete surround sound effect.
Note: To enable record function, first install ALC880 driver, then enter the control panel of
system and make sure " Realtek HD Front Pink Jack" is selected in the sound recording default
device before using front mic to record sound, if you select" Realtek HD Audio rear input" , you
can use rear mic to record sound.
6
Line in
Speaker out
Microphone in
Rear Left&Right
Front Left&Right
Center&Woofer
Side speaker out
Rear speaker out
Center&SubWoofer
speaker out
Line in
Front speaker out
Mic in
P5I915PL
Advertisement
Table of Contents
