Advertisement
Features and Controls
A green arrow on the instrument panel
will flash in the direction of the turn or
lane change.
To signal a lane change, just raise or
lower the lever until the green arrow start
to flash. Hold it there until you complete
your lane change. The lever will return b!
itself when you release it.
As you signal a turn or a lane change, if
the arrows don't flash but just stay on, a
signal bulb may be burned out and other
drivers won't see your turn signal.
If a bulb is burned out, replace it to help
avoid an accident. If the green arrows
don't go on at all when you signal a turn,
check the fuse (see "Fuses" in the Index)
and for burned-out bulbs.
feadlight High/Low Beam
' 0
change the headlights from low beam
3
high or high to low, pull the turn signal
:ver all the way toward you. Then
:lease it. When the high beams are on,
lis blue light on the instrument panel
lso will be on.
Windshield Wipers
fou control the windshield wipers by
urning the band with the wiper symbol
In
it.
;or a single wiping cycle, turn the band to
'MIST." Hold it there until the wipers
;tart, then let go. The wipers will stop
ifter one cycle. If you want more cycles,
lold the band on "MIST" longer.
You
can set the wiper speed for a long or
;hort delay between wipes. This can be
iery useful in light rain or snow. Turn the
>and to choose the delay time. The closer
:o "LO," the shorter the delay.
...
70
Advertisement
