Advertisement
Comfort Controls and Audio Systems
For "PREV" to work properly, your tape
must have at least three seconds of silence
between each selection.
The radio will not play during this
operation.
Program
Press "PROG" to switch from one side of
the tape to the other or to stop the tape
from searching.
Noise Reduction
Press
00
to reduce tape noise. This
symbol will appear in the display.
To Stop the Tape Player
0
Turn the power off or turn the ignition
key off. The cassette stays in the
player and will resume playing at the
point where it stopped.
Press "AM/FM' to stop playing the
cassette and switch to the radio. Press
"TAPE-PLAY" to restart the cassette
at the point where it stopped.
Press "EJECT" to remove the cassette
or stop the cassette and switch to
radio. "EJECT" will work with the
ignition or radio off. Press "EJECT"
to load a cassette when the radio is
Off.
NOTE: This radio has a "broken tape"
feature that will eject broken or misfed
tapes. Because of this feature, CD
changers that plug into the tape deck
will not work in this system.
Theft-Deterrent System
Your audio system is equipped with the
"THEFTLOCK" theft-deterrent system.
See "Theft-Deterrent System" at the end
of this section.
.
.
.I14
Advertisement
