Advertisement
3.4L
L32
(Code S)
Then, without shutting off the engine,
follow these steps:
1. Pull out the dipstick and wipe
it
with a
clean rag or paper towel.
1.7L
LTI
(Code P)
2 .
Push it back in all the way, wait three
seconds and then pull it back out
again.
3.
Check both sides of the dipstick, and
i-ead the lower level. The fluid level
must be in the "COLD" area for
a
colc
check or in the "HOT" area or
cross-hatched area for a hot check.
4. If the fluid level is in the acceptable
range. push the dipstick back i n all
the
way.
How to Add Fluid:
Refer to the Maintenance Schedule to
determine what kind of transmission fluid
to use. See "Recommended Fluids and
Lubricants" in the Index.
199
...
Advertisement
