Advertisement
4. Fill with the proper mix. Add coolant
until you see a steady stream of
coolant coming from the bleed valves.
5. Close the bleed valves.
i. Continue to fill the radiator up to the
*
base of the filler neck.
'.
Rinse or wipe the spilled coolant from
the engine and compartment.
I.
Start
the engine and allow it to run in
idle for approximately four minutes.
By this time, the coolant level inside
the radiator will be lower. Add more
of the proper mix through the filler
neck until the level reaches the bdse
of the filler neck.
169
...
Advertisement
