Advertisement
Steering Wheel Controls
Your vehicle may be equipped with
steering wheel controls for this audio
system. With steering wheel controls, you
can use the buttons
on
your steering
wheel to:
0
Turn the audio system on or off.
Adjust the volume.
Choose AM, FM1 or FM2.
Use the seek and recall functions.
Choose one of the preset stations on
your pushbuttons.
Setting the Tone
Use the levers to set the bass, midrange
and treble until you get the sound you
want. The "40," "100," "250" and
"625" levers adjust the bass. "1.6K' is
midrange, and "4K' and "l2K' control
the treble. We suggest setting the "1.6K'
lever in the middle position and then
moving the other levers up or down until
you get the amount of bass and treble you
like.
Adjusting the Speakers
Balance: Press "BAL" to release the
knob. Turn the knob to move the sound
between the right and left speakers. Push
"BAL" back in to store it when not
adjusting.
Fade: Press "FADE" to release the knob.
Turn the knob to move the sound between
the front and rear speakers. Push "FADE"
back in to store it when not adjusting.
To Play a Cassette Tape
Your tape player is built to work best with
tapes that are 30 to 45 minutes long on
each side. Tapes longer than that are so
thin they may not work well in this player.
A cassette symbol will appear in the
upper left corner of the display whenever
a tape is inserted.
The longer side with the tape visible goes
in first. If you hear nothing or hear just a
garbled sound, it may not be in squarely.
Press "EJECT." to remove the tape and
start over.
Once the tape is playing, use
"VOLUME," "BAL" and "FADE" just as
you do for the radio. The arrows show
which side of the tape is playing.
Forward
Press "FWD" to rapidly advance to
another part of the tape. Press "PROG' or
" F W D '
again to stop it. The radio will
play during this operation.
Reverse
Press "REV" to rapidly rewind the tape.
Press "PROG' or "REV" again to stop it.
The radio will play during this operation.
To Play the Next Selection
Press "NEXT" or "SEEK
A"
to hear the
next selection (instead of waiting until the
current selection is finished.)
For "NEXT" to work properly, your tape
must have at least three seconds of silence
between each selection.
The radio will not play during this
operation.
To Replay the Current Selection
Press "PREV" or "SEEK
v"
to play a
selection again.
113
...
Advertisement
