Advertisement
Features and Controls
To match transmitters to your vehicle:
1. Find the Data Link Connector (DLC).
It is in the bottom of the instrument
panel near the steering column.
2. Insert one end of a fused jumper into
terminal "G." Terminal "G" is the top
terminal on the far right.
jumper into terminal "A." Terminal
"A" is the bottom terminal on the far
left.
3.
Insert the other end of the fused
You have grounded the program input
line. You should hear the door locks lock
and unlock within one to three seconds.
Nhen matching transmitters, the first
ransmitter code matched will be stored in
loth memories until a second transmitter
s matched. This means that the second
ransmitter will not work until it is
natched in step 5.
0.
5.
.
a.
7.
Press any button on the first
transmitter. The door locks should
lock and unlock.
Press any button on the second
transmitter. The door locks should
lock and unlock.
Remove the fused jumper from the
DLC. The system will not work unless
the jumper is removed.
Check that all the buttons on both
transmitters work correctly.
[f the transmitters don't work, or if you'd
rather not match the transmitters yourself,
see your Pontiac dealer.
Battery Replacement
&der normal use, the batteries in your
rey chain transmitter should last about
:wo years.
You can tell the batteries are weak if the
:ransmitter won't work at the normal
-ange in any location. If you have to get
:lose to your vehicle before the
:ransmitter works, it's probably time to
:hange the batteries.
I'o replace batteries in the Remote Lock
Zontrol:
1. Pop the cover off by inserting a dime
(or similar object) in the slot between
the covers and twisting.
first.
2. Lift off the front cover, bottom half
...
46
Advertisement
