Advertisement
Changing a FIat Tire
If a tire goes flat, avoid further tire and
wheel damage by driving s'lowly to a level
place. Turn on your hazard warning
flashers.
The following steps will tell you how to
use the jack and change a tire.
The equipment you'll need is in the rear
area.
First you must remove the clcse-out
panel. See "Close-Out Panel" in the
Index.
On convertible models, you must also
remove the trunk access panel. It's at the
upper back of the trunk. Turn the two
screw knobs under the trunk edge a
quarter turn counterclockwise to remove
lhe panel.
Find the plastic screw heads in the trim
?anel over the spare tire. Use a coin or a
tey to turn the screw heads until the slots
mint front and back. Lift the trim panel
md move it out of the way.
I
171
...
Advertisement
