Remove: any rust or dirt from the wheel
bolts, mounting surfaces and spare wheel.
Place the spare on the wheel mounting
surface.
Replace the wheel nuts with the rounded
end of the nuts toward the wheel. Tighten
each nut by hand until the wheel is held
against the hub.
Replace the wheel nuts with the rounded
end of the nuts toward the wheel. Tighten
each nut by hand until the wheel is held
against the hub.
,ewer
the vehicle by rotating the wheel
vrench counterclockwise. Lower t&e jack
ompletely.
-4'
L :
-I
.
177
...