Advertisement
Comfort Controls and Audid Systems
Forward
Press and hold
" F W D '
to quickly
advance within a track. Release it to
resume playing. The radio will play
during this operation.
Random
Press
"RDM'
to hear a random selection
of tracks.
To Stop the Disc Player
Turn the power off or turn the ignition
key off. The disc stays in the player
and will resume,playing at the point
where it stopped.
Press "AM/FM' to stop playing the
disc and switch to radio. Press
"CDPLAY" to restart the disc at the
point wherk it stopped.
Press "EJECT" to eject the disc or
stop the disc arid switch to radio.
"EJECT" wili work with the ignition
or radio off. Press "EJECT" to load a
disc when the audio system is
off.
rheft-Deterrent System
Your auklio system is equipped with the
'THEFTLOCK" theft-deterrent system.
See "Theft-Deterrent System" at the end
3f
this section.
rheft-Deterrent Feature
rHEFTZOCK is a security feature for the
Zassette tape and compact disc player. It
:an be used or ignored. If ignored, the
System functions normally: If it is used,
your system won't be usable if it's ever
stolen. When the system is active, the
indicator light will flash while the ignition
is off.
Setting Your Security Code
The instructions below tell you how to
enter a security code into the system. If
your vehicle loses battery power for any
reason, you must enter the security code
again before the system will turn on.
1. Write down any number from 000 to
1999 and keep it in a safe place.
2. Turn the ignition switch to tHk "ACC"
or "Run" position.
3 .
T~irn the audio system off.
4. Press and hold pushbuttons "1" and
"4" together until
"---"
shows on the
display.
You are now ready to enter your security
:ode. Don't wait more than 15 seconds
between steps.
5.
Press "MIN" and "000" will appear
on the display.
6. Press "MIN' again and hold until the
last two digits of your code appear.
Release the button.
7. Press "HR' until the first one or two
digits of your code appears.
on tine display.
verification.
8. Press
" A " . "
"rEP" will appear
9. Repeat steps 5 through 7 for
10. Press "A"."
"SEC" will appear
on the display. This means that your
audio system is secured.
.
.
.I20
Advertisement
