Labels & Cosmetics - Grizzly G0920 Owner's Manual

703
701
WARNING!
WARNING!
To reduce risk of death EYE/LUNG INJURY
or serious injury, read
HAZARD!
manual BEFORE using
Always wear safety
machine.
glasses and a
To get a new manual,
respirator when
call (800) 523-4777 or
using this machine.
go to www.grizzly.com.
711
REF PART # DESCRIPTION
701 P0920701 READ MANUAL/PPE LABEL
702 P0920702 KEEP DOOR CLOSED LABEL
703 P0920703 KICKBACK/PINCH HAZARD LABEL
704 P0920704 ELECTRICITY LABEL
705 P0920705 SHOCK/ENTANGLEMENT HAZARD LABEL
706 P0920706 FPM LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-56-
Scan QR code to visit our Parts Store.
G0920 Machine Labels A
Labels & Cosmetics
(03/10/21)
###
WARNING!
WARNING!
To reduce risk of death EYE/LUNG INJURY
or serious injury, read
HAZARD!
manual BEFORE using
Always wear safety
machine.
glasses and a
###
To get a new manual,
respirator when
call (800) 523-4777 or
using this machine.
go to www.grizzly.com.
702
WARNING!
ENTANGLEMENT
KEEP DOOR
HAZARD!
CLOSED
Keep loose
WHILE clothing and long
hair away from
OPERATING!
conveyor ends.
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
FOR GRIZZLY MACHINES ONLY!
WARNING PANTONE 151 C or RAL 2005
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
PANTONE 711C or RAL 3020
GRIZZLY LOGO RED
G0920
NOTE: Labels marked with ### are new
or have changed since last sending.
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
MODEL G0920
22" SINGLE DRUM SANDER
WARNING!
Specifications
705
Main Motor: 2 HP, 230V, 1-Phase, 60 Hz To reduce the risk of serious injury while using this machine:
Feed Motor: 50W, 230V, 1-Phase, 60 Hz 1. Read and understand owner's manual before operating.
Full-Load Current Rating: 8.5A 2. Always wear approved eye protection and respirator.
Drum Speed: 2300 FPM 3. Only plug power cord into a grounded outlet.
4. Never place hands near or in any opening during operation.
Drum Diameter: 5"
Feed Rate: 0–20 FPM 5. Never touch moving sandpaper or conveyor belt.
Max Board Width: 21-1/4" 6. Never sand more than one board at a time.
Max Board Thickness: 5" 7. Make sure sander is properly assembled, adjusted, and stable before operating. Only
Min Board Dim: 1/4" T x 9" L x 2" W operate with top cover closed and secured.
Sandpaper Width: 3" 8. Be aware of pinch points located at the edge of conveyor.
WARNING!
Sandpaper Length: 127" 9. Only remove jammed pieces when machine is stopped and disconnected from power.
Weight: 307 lbs. 10. Turn motor OFF and disconnect power before changing
ENTANGLEMENT
sandpaper, opening machine, or servicing.
HAZARD!
11. Do not wear loose clothing, gloves, jewelry, or other articles that can get entangled.
Keep loose
Tie back long hair and roll up sleeves.
clothing and long
Date
12. Do not expose to rain or use in wet locations.
hair away from
conveyor ends. 13. Do not operate under influence of drugs or alcohol, or if tired.
S/N
14. Prevent unauthorized use by children or untrained users; restrict access or disable
machine when unattended.
Mfd. for Grizzly in Taiwan
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
712
artwork changes are required, contact us immediately at manuals@grizzly.com.
22" SINGLE DRUM SANDER
Specifications
Main Motor: 2 HP, 230V, 1-Phase, 60 Hz To reduce the risk of serious injury while using this machine:
Feed Motor: 50W, 230V, 1-Phase, 60 Hz 1. Read and understand owner's manual before operating.
Full-Load Current Rating: 8.5A 2. Always wear approved eye protection and respirator.
Drum Speed: 2300 FPM 3. Only plug power cord into a grounded outlet.
Drum Diameter: 5" 4. Never place hands near or in any opening during operation.
Feed Rate: 0–20 FPM 5. Never touch moving sandpaper or conveyor belt.
Max Board Width: 21-1/4" 6. Never sand more than one board at a time.
Max Board Thickness: 5" 7. Make sure sander is properly assembled, adjusted, and stable before operating. Only
Min Board Dim: 1/4" T x 9" L x 2" W operate with top cover closed and secured.
Sandpaper Width: 3" 8. Be aware of pinch points located at the edge of conveyor.
Sandpaper Length: 127" 9. Only remove jammed pieces when machine is stopped and disconnected from power.
Weight: 307 lbs. 10. Turn motor OFF and disconnect power before changing
sandpaper, opening machine, or servicing.
11. Do not wear loose clothing, gloves, jewelry, or other articles that can get entangled.
Tie back long hair and roll up sleeves.
Date
12. Do not expose to rain or use in wet locations.
13. Do not operate under influence of drugs or alcohol, or if tired.
S/N
14. Prevent unauthorized use by children or untrained users; restrict access or disable
Mfd. for Grizzly in Taiwan machine when unattended.
709
710
REF PART # DESCRIPTION
707 P0920707 MACHINE ID LABEL
708 P0920708 GRIZZLY NAMEPLATE
709 P0920709 TOUCH-UP PAINT, GRIZZLY BEIGE
710 P0920710 MODEL NUMBER LABEL
711 P0920711 TOUCH-UP PAINT, GRIZZLY GREEN
712 P0920712 MAX SANDING WIDTH LABEL
Model G0920 (Mfd. Since 10/20)
KEEP DOOR
CLOSED
WHILE
OPERATING!
704
If
706
0 20
FPM
707
MODEL G0920
WARNING!
708