Grizzly G0920 Owner's Manual page 21

17. Attach digital depth gauge to arch body with
(2) M5-.8 x 8 Phillips head screws and 5mm
flat washers (see Figure 18).
x 2
Arch Body
Figure 18. Digital depth gauge installed on
machine.
18. Attach arch mounting bracket to drum case
with (2) M5-.8 x 8 Phillips head screws, 5mm
lock washers, and 5mm flat washers (see
Figure 19).
Drum Case
x 2
Arch Mounting Bracket
Figure 19. Arch mounting bracket attached to
drum case.
Model G0920 (Mfd. Since 10/20)
Fixed Brackets
19. Install CR2032 battery in digital depth gauge
(see Figure 20).
Battery
Figure 20. Battery installed in depth gauge.
20. Attach (1) right and (1) left table mounting
block to (1) table mounting bracket with
(4) M8-1.25 x 25 flat head screws (see
Figure 21).
Table
Mounting Bracket
Mounting Blocks
Figure 21. Table mounting blocks attached to
bracket.
x 4
-19-