Grizzly G0920 Owner's Manual page 19

5. Attach left side panel to rear panel with (2)
M8-1.25 x 25 hex bolts, (4) 8mm flat washers,
(2) 8mm lock washers, and (2) M8-1.25 hex
nuts (see Figure 10).
Rear
Panel
x 2
Left
Side
Panel
Figure 10. Left side panel attached to rear
panel.
6.
Attach bottom panel to left side panel with (1)
M5-.8 x 8 Phillips head screw and 5mm flat
washer.
7.
Attach front panel to side panels with (4)
M8-1.25 x 25 hex bolts, (8) 8mm flat washers,
(4) 8mm lock washers, and (4) M8-1.25 hex
nuts (see Figure 11).
x 4
Left
Side
Panel
Figure 11. Front panel attached to side panels.
Model G0920 (Mfd. Since 10/20)
8. Attach top panel to front and rear panels with
(4) M5-.8 x 8 Phillips head screws and 5mm
flat washers (see Figure 12).
Figure 12. Top panel attached to front and rear
9. Attach (1) partition panel to right side panel
with (2) M5-.8 x 8 Phillips head screws, 5mm
lock washers, and 5mm flat washers (see
Figure 13).
x 2
Right
Side
Panel
Figure 13. Partition panel attached to right side
Front
Panel 10. Attach remaining partition panel to left side
panel with (2) M5-.8 x 8 Phillips head screws,
5mm lock washers, and 5mm flat washers.
Top
Panel
panels.
panel.
x 4
Front
Panel
Partition
Panel
-17-