Grizzly G0920 Owner's Manual page 20

Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
11. Use assistants or insert forklift forks under-
neath sander at locations shown in Figure 14.
Figure 14. Locations for lifting.
12. Place sander on stand and attach with (4)
M8-1.25 x 40 hex bolts and 8mm fender
washers (see Figure 15).
x 4
Figure 15. Attaching sander to cabinet.
-18-
HEAVY LIFT!
13. Thread handwheel handle into drum height
handwheel (see Figure 16).
14. Install drum height handwheel on shaft
shown in Figure 16 and tighten pre-installed
set screw to secure.
15. Attach dust hose hook with (2) pre-installed
M6-1 x 16 Phillips head screws (see
Figure 16).
Handwheel Handle
Shaft
Dust Hose
Hook
Figure 16. Drum height handwheel installed on
sander.
16. Attach digital depth gauge to arch mounting
bracket with (2) M3-.5 x 6 Phillips head screws
and 4mm flat washers (see Figure 17).
Digital
Depth
Gauge
Figure 17. Digital depth gauge attached to arch
bracket.
Model G0920 (Mfd. Since 10/20)
Drum Height
Handwheel
x 2
Arch
Mounting
Bracket
x 2