CHAPTER 3
D. Deflector Solenoid Unit
1) Following the rear cover removal proce-
dure on Page 3-2, remove the rear cover.
2) Remove the 2 screws and then the
deflector link guide.
Deflector link guide
Screws
Figure 3-5-4
3) Remove the 5 screws, disconnect the
connector, and then take out the deflec-
tor solenoid unit.
Screws
Connector
Deflector solenoid unit
Figure 3-5-5
3 - 14
E. Feed Motor
1) Following the rear cover removal proce-
dure on Page 3-2, remove the rear cover.
2) Remove the screw, and then take off the
shield plate by slanting the cable retain-
er.
Screw
Shield plate
Figure 3-5-6
3) Remove the 2 screws, disconnect the
connector, and then take off the feed
motor.
Screws
Feed motor
Figure 3-5-7
Cable retainer
Connector