Canon SORTER S-82 Service Manual page 39

2. Mail Box
After the paper is reversed, it is fed back into the sorter by the rotation of the feed roller and
detected by the reversing sensor (PI10). Then, the sorter driver turns ON either the deflector
solenoid 1 (SL3) or 2 (SL4) according to the specified delivery bin, and the paper is delivered to
the specified face-down bin.
When the face-down bin 1, 3, or 5 is specified, SL3 is turned ON. When the face-down bin
2, 4, or 6 is specified, SL4 is turned ON. When the face-down bin 7 is specified, neither SL3 nor
4 is turned ON.
When the specified bin is full, the sorter driver informs the option controller of the full-load
condition. If printing has been already started, the printed paper is delivered to the specified
bin. When the fully loaded bin is unloaded, the printer resumes printing and paper is delivered
to the specified bin.
Mail box 1
Mail box 2
Mail box 3
Mail box 4
Mail box 5
Mail box 6
Mail box 7
Figure 2-2-10
CHAPTER 2
2 - 15