Canon SORTER S-82 Service Manual page 19

3. Connecting the Interface Cables
Always turn the printer and sorter OFF and remove the plug from the AC outlet before con-
necting or disconnecting the interface cable.
1) The sorter has two interface connectors. Use the upper connector (IN) to connect the sorter
to the printer, and the lower connector (OUT) to connect the sorter to other optional devices.
2) The connectors at each end of the interface cable that connects the sorter to the printer are
different from each other as illustrated below. The connector on the sorter side has 15 pins
and the one on the printer side has 14 pins.
3) Plug the connector with 15 pins on the interface cable into the upper connector (IN) on the
sorter and secure with the fixing screws.
4) Connect the connector with 14 pins on the other end of the interface cable to the option con-
troller in the printer.
Figure 1-4-11
15 pins
Figure 1-4-12
CHAPTER 1
Connector (IN)
Connector (OUT)
14 pins
1 - 11