Canon SORTER S-82 Service Manual page 42

CHAPTER 2
5. Sorting
After the paper is reversed, it is fed back into the sorter by the rotation of the feed roller and
detected by the reversing sensor (PI10). Then, the sorter driver turns ON either the deflector
solenoid 1 (SL3) or 2 (SL4) according to the specified delivery bin, and the paper is delivered to
the specified face-down bin.
When the face-down bin 1, 3, or 5 is specified, SL3 is turned ON. When the face-down bin
2, 4, or 6 is specified, SL4 is turned ON. When the face-down bin 7 is specified, neither SL3 nor
4 is turned ON.
The paper is delivered from the bin 1 in succession to the lower ones, whether there are empty
bins or not. When the paper is delivered down to the bin 7, the bin is shifted to the uppermost
face-down bin 1 and the paper is delivered to it, followed by the bin 2, bin 3 and so on.
When a bin is fully loaded, the sorter driver informs the option controller of the full-load con-
dition. The paper already printed is delivered to the specified bin.
By removing the printed paper loaded in the bins, the printer resumes printing and paper
delivery to the specified bins is continued.
2 - 18
1~25 page
1~25 page
1~25 page
1~25 page
1~25 page
Figure 2-2-13