B. Reversing Solenoid
1) Following the rear cover removal proce-
dure on Page 3-2, remove the rear cover.
2) Remove the screw, disconnect the con-
nector, and then take off the reversing
solenoid.
Screw
Connector
Figure 3-5-2
Reversing solenoid
C. Face-up Deflector Solenoid
1) Following the front cover removal proce-
dure on page 3-2, remove the front
cover.
2) Remove the screw, disconnect the con-
nector, and then take off the face-up
deflector solenoid.
Connector
Screw
Face-up deflector solenoid
Figure 3-5-3
CHAPTER 3
3 - 13