VIII. MAINTENANCE AND SERVICING
A. Periodic Replacement Parts
No parts require periodic replacement in this sorter.
Note:
Periodic replacement parts are the parts that must be replaced at regular intervals, even
if they are functioning properly and show no signs of wear. (Failure of these parts can
seriously affect the performance.) These parts should be replaced during a regular ser-
vice visit closest to the end of the parts expected life.
B. Expected Service Life of Consumable Parts
No consumable parts in this sorter.
Note:
Consumable parts are the parts that can be used until they become defective.
C. Periodic Service
The sorter has no parts that require periodic servicing.
D. Standard Tools
The standard tools that are required to service the sorter are the same as that for the printer.
E. Special Tools
No special tools required for this sorter.
F. List of Lubricants and Cleaners
No. Material name
1
Alcohol: ethyl
C
(pure or
(CH
denatured) or
isopropyl (pure
or denatured)
2
MEK (methyl
CH
ethyl ketone)
3
Lubricating
Special oil
agent
Special solid lubricating
material
Lithium soap
Note:
After using solvent, wipe it out completely.
Table 4-8-1
Components
H
OH,
Cleaning: plastic,
2
5
)
CHOH
rubber, external parts
3
2
CO-C
H
Cleaning: oil and toner
3
2
5
stains
Apply to gears
Use
Remarks
•
Purchase locally
•
Flammable: keep away
from flame
•
Purchase locally
•
Highly flammable: keep
away from flame
• Tool No. HY9-0007
(20 g tube)
CHAPTER 4
4 - 19