Measurement And Adjustment; Mechanical Adjustment; Electrical Adjustment; Leds, Test Pins, Jumpers And Switches On Pcbs - Canon SORTER S-82 Service Manual

VII. MEASUREMENT AND ADJUSTMENT
A. Mechanical Adjustment
No adjustment is required for the mechanical system of this sorter.
B. Electrical Adjustment
No adjustment is required for the electrical system of this sorter.
C. LEDs, Test Pins, Jumpers and Switches on PCBs
Only the LEDs, test pins, jumpers, and switches required for after-sales service in the field are
listed below.
All other test pins, etc. are for the factory use only. The adjustment and check using these
test pins, etc. require special tools, measuring instruments and high precision. Do not touch
them in the field.
Note: Some LEDs receive leakage current during normal operation, thus glow dimly even when
they should be OFF.
CHAPTER 4
4 - 17