Table of Contents
Advertisement
6. Remove the electrical latch connector from the bracket on the oil dipstick
tube.
a
7. Connect the electrical latch connector to the hood latch.
8. Install the hood. Refer to Hood Installation.
Flushing the Cooling System
Flush the internal water passages of the outboard with fresh water after each
use in salt, polluted, or muddy water. This will help prevent a buildup of
deposits from clogging the internal water passages.
TRADITIONAL FLUSHING
1. With the engine turned off, place the outboard in a convenient position.
MAINTENANCE
a -
b -
c -
b
c
71938
b
a
71878
84
Oil dipstick tube
Bracket
Electrical latch connector
a -
Hood latch
b -
Electrical latch connector
eng
Advertisement
Table of Contents
