Mercury GO BOLDLY SeaPro 500hp Operation And Maintenance Manual page 115

NOTE: Keep the transmission vent filter dry after it is removed. Replace the
transmission vent filter if it gets submerged in any liquid, such as water or oil.
5. Install the fluid drain hose from the fluid transfer pump assembly onto the
transmission dipstick tube (not the vent tube). The lock button on the fluid
drain hose will snap into place.
NOTE: A powered Mercury fluid transfer pump is recommended, as it is
equipped with an appropriate fluid drain hose. If an alternative transfer pump is
used, obtain a Mercury fluid drain hose to adapt to the pump.
Fluid Transfer Pump
Fluid Drain Hose
a - Transmission dipstick
b - Transmission vent filter
c - Fluid drain hose (attached to fluid transfer pump assembly)
d - Lock button
e - Dipstick tube
6. Place the fluid transfer pump drain tube into an appropriate container. The
container should be large enough to hold at least 6.75 liters (7 US qt).
eng
MAINTENANCE
72539
64627
a
e
105
8M0180953
Aids in the removal and addition of
engine fluids.
8M0129230
Aids in the removal of engine fluids.
Connect to a fluid transfer pump.
b
c
d
e
72288