Mercury GO BOLDLY SeaPro 500hp Operation And Maintenance Manual page 85

Check that the lanyard stop switch stops the engine.
Inspect the fuel system for leaks. Refer to Fuel System.
Inspect the tightness on transom. Refer to Inspect
Transom Tightness.
Check the propellers for damage.
Inspect hydraulic hoses for leaks.
(200 Hours or Before Long‑Term Storage)
Check that the lanyard stop switch stops the engine.
Inspect the engine starting battery. Refer to Battery
Inspection.
Inspect the battery cables and clean power harness.
Refer to Battery Cables and Clean Power Harness.
Inspect the fuel system for leaks. Refer to Fuel System.
Inspect the tightness on transom. Refer to Inspect
Transom Tightness.
Check the propellers for damage.
Inspect hydraulic hoses for leaks.
Inspect the corrosion control anodes. Refer to Corrosion
Control Anodes.
Change the engine oil and filter. Refer to Changing
Engine Oil and Filter.
Change the gearcase lubricant. Refer to Gearcase
Lubricant.
Change the transmission fluid. Refer to Transmission
Fluid.
Replace the boat‑mounted fuel filter. Refer to Fuel
System.
Check that the lanyard stop switch stops the engine.
Inspect the fuel system for leaks. Refer to Fuel System.
Inspect the tightness on transom. Refer to Inspect
Transom Tightness.
Check the propellers for damage.
Inspect hydraulic hoses for leaks.
Inspect the corrosion control anodes. Refer to Corrosion
Control Anodes.
eng
MAINTENANCE
Daily Check
200 Hour Maintenance
1000 Hour Maintenance
75
Inspect Replace
X
X
X
X
X
Inspect Replace
X
X
X
X
X
X
X
X
X
X
X
X
Inspect Replace
X
X
X
X
X
X