Mercury GO BOLDLY SeaPro 500hp Operation And Maintenance Manual page 105

3. Open the hood. Refer to Hood Opening.
4. Remove the dipstick.
5. Install the fluid drain hose from the fluid transfer pump assembly onto the
oil dipstick tube. The lock button on the fluid drain hose will snap into
place.
NOTE: A powered Mercury fluid transfer pump is recommended, as it is
equipped with an appropriate fluid drain hose. If an alternative transfer pump is
used, obtain a Mercury oil drain hose to adapt to the pump.
eng
MAINTENANCE
a
b
c
71991
a
b
72238
95
a - Hood
b - Oil fill cap
c - Dipstick
a - Fluid drain hose
b - Lock button