Mercury GO BOLDLY SeaPro 500hp Operation And Maintenance Manual page 118

4. Remove the transmission vent filter and store it in a dry location.
NOTE: Keep the transmission vent filter dry after it is removed. Replace the
transmission vent filter if it gets submerged in any liquid, such as water or oil.
5. Attach a funnel to a fluid drain hose and install the assembly onto the
transmission dipstick tube (not the vent tube). The lock button on the fluid
drain hose will snap into place.
Fluid Drain Hose
a - Transmission dipstick
b - Transmission vent filter
c - Fluid drain hose (attached to funnel)
d - Lock button
e - Dipstick tube
6. Fill a graduated cylinder with approximately 5.7 L (6.0 US qt) of the
specified transmission fluid. Fill the transmission fluid through the dipstick
hole to bring the level up to the maximum mark on the dipstick.
Description
Automatic Transmission
Fluid
7. Remove the fluid drain hose/funnel from the dipstick tube.
8. Install the dipstick.
9. Install the vent filter.
MAINTENANCE
64627
a
e
Where Used
Transmission
108
8M0129230
Aids in the removal of engine fluids.
Connect to a fluid transfer pump.
b
c
d
e
72288
Part No.
8M0173229
eng