Table of Contents
Advertisement
NOTE: The engine electronically monitors engine oil level without user
interaction.
2. Verify the cooling water intake is submerged.
3. Set the lanyard stop switch to the RUN position. Refer to General
Information ‑ Lanyard Stop Switch.
4. Shift the outboard to neutral (N) position.
b
a
NOTE: Before starting an engine that has been run out of fuel, refer to the Ran
Out of Fuel Condition—Priming the Fuel System
OPERATION
a -
c
b -
c -
71986
64
71985
19791
Forward
Neutral
Reverse
procedure.
eng
Advertisement
Table of Contents
