Table of Contents
Advertisement
Operating the boat at high speeds with the outboard trimmed too far under
can create excessive bow steer, resulting in the operator losing control of
the boat. Install the trim limit pin in a position that prevents excessive trim
under and operate the boat in a safe manner.
2. Trimming out or up can:
• Lift the bow higher out of the water.
• Generally increase top speed.
• Increase clearance over submerged objects or a shallow bottom.
• In excess, can cause boat porpoising (bouncing) or propeller
ventilation.
• Cause engine overheating if any cooling water intake holes are above
the waterline.
TILTING TO FULL UP POSITION
Tilt at Helm
NOTE: The trim/tilt switch will remain active for 15 minutes after the ignition key
switch has been turned off.
1. If the ignition key switch has been turned off for over 15 minutes, turn it to
the ON position.
2. Press the trim/tilt switch to the UP position. The outboard will tilt up until
the switch is released or it reaches its maximum tilt position.
Tilt at Engine
The cowl mounted auxiliary tilt switch can be used to tilt the outboard with the
key switch in the OFF position. Refer to Auxiliary Tilt Switch.
FEATURES AND CONTROLS
WARNING
!
56
eng
Advertisement
Table of Contents
