Online Data Transfer To The Printer - Proceq PAROTESTER 2 Operating Instructions Manual

7.3

Online data transfer to the printer

( with serial interface RS232C )
Press the «MENU» key to return to the main menu
where the «Data output» menu item can be selected
with the arrow keys ( h / i ) ( Fig. 45).Press the «START»
key to enter the data output menu ( Fig. 46 ). Select the
«Online PC / Printer» menu item with the arrow keys
( h / i ). Press the «START» key. The online mode for PC
or printer can be selected with the arrow keys ( g / f ).
Online mode for the printer is selected by pressing the
«END» key ( Fig. 47 ).
Fig. 45 Fig. 46
In online mode the measured data are transferred to the
printer after every roll or series of measurements. Online
transfer to the printer is carried out manually when the
«END» key is pressed or automatically.
Manual online transfer:
The data are always transferred manually when the
«END» key is pressed.
18 . Data output .
Fig. 47
Printing options:
Press the «END» key 1x to print the hardness pro-
file, mean value, standard deviation ( ± s ) and range R
( R = Max - Min ) of the measurement series or roll.
Press the «END» key 2x to print the individual measured
values of the measurement series or roll.
The print options with the «END» key only
apply when n = 0 in the «Mean value» menu.
Automatic online transfer
The data are transferred automatically if the number of
measurements are pre-programmed. Entry of the num-
ber of measurements can be set in the «Mean value»
menu ( n = XXX ).
During automatic printing n = XXX, output on the printer is
identical to the output version A when the «END» key is
pressed 1x.
© 2012 Proceq SA