Other Settings - Proceq PAROTESTER 2 Operating Instructions Manual

(Fig. 13) and selection is analog.
Press the «START» key
Fig.13
6.3.2 Other settings Roll number entry
On the PAROTESTER2 display device there are two
input types for the identifying roll numbers
1. Manual entry of a roll number
The maximum length of a roll identification is 14 or 25
characters. Roll numbers with 25 characters are only
possible from display device SN 511.XXXX onwards.
Press the «MENU» key to return to the main menu
(Fig.15). Select the «Roll number» menu item with the
cursor and press the «START» key. The last set roll
number is visible on this screen ( Fig. 16 ).
The cursor [ ] is always located at the left-hand edge of
the roll number if the «Roll number» menu item
is selected.
. 10 Operation of the devices .
a
Select the impact direction
Fig.14
Press the «START» key
Fig. 15
The following characters are available for the roll identi-
fication:
• Alphabetic character: A to Z
• Numeric characters: 0 to 9
• Special characters: [ : ] , [ - ],
• Spaces [ ]
PAROTESTER2 offers the option of setting works-related
roll identifications with a consecutive roll number (incremen-
tation).
Only left-justified input of a roll identification is possible.
Each character of the roll identification can be reached
with the arrow keys ( g / f ). A black square below the roll
identification [ ] shows whether the set characters are
alphabetic, numeric or special characters.
a
Setting a number
Fig. 16
© 2012 Proceq SA