Setting The Time - iHome iBTW23 Instruction Manual

S E T T I N G T H E T I M E
1. Press and hold the Clock Button on the top of the unit. A beep will sound
and the TIME will flash on the display.
Press the + or – Buttons to set the correct time (hold for rapid adjustment).
(By default, the display shows a 24 hour time format. To toggle between 24
and 12 hour (AM/PM) display modes, press and release the
Alarm 2 Button at any time while display is flashing during time setting
mode. In 12 hour display mode, make sure to set the correct AM or PM time.
The PM indicator appears to the left of the time display if set to 12 hour
display; there is no AM indicator.)
2. Press and release the Clock Button to confirm the current time setting. The
YEAR will flash on the display. Press the + or – Buttons to set the correct
year.
3. Press and release the Clock Button to confirm the current year setting. The
DATE will flash on the display. Press the + or – Buttons to set the correct
month and day (hold for rapid adjustment).
4. Press and release the Clock Button to confirm the current date setting. Two
beeps will sound to indicate time setting mode is complete.
SETTING THE HOUR ADJUST SWITCH
This unit has an Hour Adjust switch on the bottom of the unit in the battery
compartment to adjust the time for summer time and standard time. By
default, it is set to 0 and will do nothing. To account for summer time and/or
return to standard time, slide the switch to +1 to add one hour or to –1 to
subtract an hour.
Alarm 1 or
5