S E T T I N G A N D U S I N G T H E A L A R M S - iHome iBTW23 Instruction Manual

S E T T I N G A N D U S I N G T H E A L A R M S

SETTING THE ALARMS
This unit has two alarms which are set the same way. Instructions below are for
setting alarm . Substitute the Alarm 2 Button to set alarm 2. You can
wake to your Bluetooth device or to the built-in tones. The alarm will sound for
60 minutes or until reset/turned o .
1. Press and hold the Alarm Button for 2 seconds until the alarm time display
and alarm icon flashes and one beep sounds.
2. Press the + or – Buttons to adjust the display to the desired alarm time (hold
for rapid adjustment). Remember to set the correct AM or PM alarm time
(the PM indicator appears to the left of the alarm time display.
3. Press the Alarm Button to confirm the alarm time. The wake to schedule
will flash.
4. Press the + or – Buttons to set the desired alarm schedule: 7 Days (every
day), 5 Days (week days only) or 2 Days (weekends only).
5. Press the Alarm Button to confirm the alarm schedule. The wake source
indicator will flash on the display. Press the + or – Buttons to select BT
Alarm Button to access preferences
(Bluetooth) or Tone, then press the
and volume setting for the selected alarm source.
Wake to BT: If wake to Bluetooth (BT) is selected, press the + or – Buttons
to set the BT volume (can be set from 5–40). The alarm will
wake you to the last track played on the last linked Bluetooth
device. Note: if Bluetooth is not detected at alarm time, alarm
will default to tone.
Wake to Tone: Select to wake to one of the 4 built-in alarm tones. Press the
+ or – Buttons to listen to and select the desired tone.
Confirm with the Alarm Button, then press the + or –
Buttons to set the alarm volume (can be set from 5–40).
6. Press the Alarm Button to exit and confirm alarm settings. An alarm icon
will appear on the display, indicating that the alarm is set and armed.
NOTE: alarm volume is independent from normal volume.
6