Setting The Time; Daylight Saving Time - iHome iBT22A Instruction Manual

Setting the Time

1. Press and hold the Clock Adjust Button (located on the back of the unit) until the time flashes in the
display and a beep sounds.
2. Press and release the – or + Buttons to adjust the clock to the current time (hold to advance or reverse
rapidly). Make sure to set the correct AM/PM time. The PM indicator appears to the left of the time
display; there is no AM indicator.
3. Press and release the Clock Adjust Button. The year will flash on the display and a beep will sound.
4. Press and release the – or + Buttons until the current year is displayed (hold to advance or reverse
rapidly).
5. Press and release the Clock Adjust Button again. The date will flash on the display and a beep will
sound.
6. Press and release the – or + Buttons until the current date is displayed (hold to advance or reverse
rapidly).
7. Press and release the Clock Adjust Button again to complete time setting. You will hear 2 beeps to
confirm time setting is complete.
NOTE: Press the
or Button at any time during time setting to toggle between standard
12 hour display and 24 hour ("military") display modes.

Daylight Saving Time

1. Slide the DST (Daylight Saving Time) Switch located on the back of the unit to +1 to add one hour
for daylight saving time or slide to -1 to subtract an hour for standard time. The DST icon will appear
on the display when switch is set to +1 to indicate daylight saving time.
Using the
5
P10
iBT22A