Subscribe to Our Youtube Channel
Related Manuals for iHome iBN18
Summary of Contents for iHome iBN18
- Page 1 Eng IB Size: 153mm x 120mm Printing color: Black Nov 04, 2013 iBN18 NFC Bluetooth Dual Alarm Clock with USB Charging instruction manual...
- Page 2 Introduction Thank you for purchasing the iHome iBN18. This product is designed to provide high quality wireless sound from your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit.
- Page 3 11/04/2013 iBN18 FCC Information FCC Radiation Exposure Statement FCC ID: EMOIBN180 IC: 986B-IBN180 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 4: Table Of Contents
Table of Contents Meet Your iBN18......................5 The Display/Setting Up the Unit ..................6 Installing/Replacing Backup Batteries ..................7 Setting the Clock ......................8 Setting and Using the Alarm/Previewing Alarm ..............9 Snooze/Dimmer Button/Sleep and Nap Modes ..............10 Using Bluetooth: Pairing & Playing Your Device Using NFC............11 Pairing Your Device Using Standard Bluetooth ..............12... - Page 5 Included • iBN18 system • 100V-240V universal AC adaptor • 12 inch audio cable iBN18 AC adaptor 12 inch audio cable...
-
Page 6: Meet Your Ibn18
Meet Your iBN18 Bottom NFC Antenna CAN ICES-3 (B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Sleep Button (1) This device may not cause harmful interference, and (2) this device must accept any interference received, Mode Button including interference that may cause undesired operation. -
Page 7: The Display/Setting Up The Unit
Using the The Display Time Display Bluetooth Audio Indicator AM/PM Indicators Bluetooth Pairing Alarm Active Indicators Indicator Low Backup DST Mode Indicator Battery Indicator Sleep Mode Indicator Mode/Wake to Alarm Source Indicators: Tone, Bluetooth device, Aux in device Setting Up the Unit... -
Page 8: Installing/Replacing Backup Batteries
Using the Replacing and Installing Clock Backup Batteries Note: 2 AAA batteries are included with the unit. Install them before using the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption (the display is NOT maintained). -
Page 9: Setting The Clock
Using the Setting the Clock The unit features a Daylight Saving Time (DST) Switch on the back of the unit to quickly add or subtract an hour to account for Daylight Saving Time and Standard Time differences. Before setting the time, move the DST Switch to +1if Daylight Saving Time is in effect or to -1 if Standard Time is in effect. -
Page 10: Setting And Using The Alarm/Previewing Alarm
Using the Setting and Using the Alarms This unit has 2 separate alarms, each set the same way. Below we explain how to set Alarm 1. To set alarm 2, follow the same steps using the Alarm 2 Button. -
Page 11: Snooze/Dimmer Button/Sleep And Nap Modes
Using the Previewing Alarms and Turning Alarms On/Off 1. Press and release the Alarm Button to view the current alarm time. 2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the alarm icon. -
Page 12: Using Bluetooth: Pairing & Playing Your Device Using Nfc
Bluetooth indicator icon will flash while the unit attempts to pair. “iHome iBN18” should appear on your device’s menu. Once paired with a device, the Bluetooth indicator on the display will stop flashing, then the Bluetooth icon will remain and a confirmation tone will sound and your music will play through the unit. -
Page 13: Pairing Your Device Using Standard Bluetooth
2. Press and hold the Pairing Button on the back of the unit for 2 seconds until the Bluetooth icon flashes on the display and a beep sounds, indicating pairing attempt. “iHome iBN18” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBN18”... -
Page 14: Playing Audio Via Bluetooth/Playing Audio Via Aux-In
Using the Playing Audio Via Bluetooth 1. Press the Button to turn the unit ON. 2. Press and release the Mode Button as needed until the Bluetooth indicator icon appears on the display. 3. Press the Play Pause Button on the unit to play audio from your linked Bluetooth device. -
Page 15: Charging Devices Via Usb Port
Using the Charging Devices via USB Port 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. -
Page 16: Troubleshooting
• Check that all connections are correct and properly plugged in. • Only use the AC adaptor that came with the unit • Make sure your device is properly paired with the iBN18. • Make sure the Power is ON. -
Page 17: Consumer Product Safety Guide
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free... -
Page 18: Warranty
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Need help?
Do you have a question about the iBN18 and is the answer not in the manual?
Questions and answers