Setting The Time - iHome iBTW450 Manual

S E T T I N G T H E T I M E
1. Press and hold the Clock Button on the back of the unit. A beep will
sound and the TIME will flash on the display.
Press the + or – Buttons to set the correct time (hold for rapid
adjustment). Make sure to set the correct AM or PM time. (The AM/PM
indicators appear to the left of the time display.)
NOTE: The display can be set to standard 12 hour time (AM and PM) or to
24 hour time. To toggle between 12 and 24 modes, press and release the
Alarm 1 or
during time setting mode.
2. Press and release the Clock Button to confirm the current time setting. The
YEAR will flash on the display. Press the + or – Buttons to set the correct
year.
3. Press and release the Clock Button to confirm the current year setting. The
DATE will flash on the display. Press the + or – Buttons to set the correct
month and day (hold for rapid adjustment).
4. Press and release the Clock Button to confirm the current date setting.
Two beeps will sound to indicate time setting mode is complete.
SETTING THE DAYLIGHT SAVING TIME (DST) SWITCH
This unit has a DST switch on the back of the unit to adjust the time for
daylight saving time and standard time. By default, it is set to Auto and will
automatically adjust the time at the start and end of daylight saving time. If
you are located in an area that does not observe daylight saving time or
otherwise wish to adjust manually, slide the switch to +1 to add one hour or
to –1 to subtract an hour.
5
Alarm 2 Button at any time while display is flashing