Connecting To Ac Power - iHome iBTW23 Instruction Manual

C O N N E C T I N G T O A C P O W E R
Select the proper plug for your
location. If needed, press button
tab and turn plug LEFT to release
current plug. Insert correct plug
into adapter and turn RIGHT to
lock into place. Connect the
universal voltage AC adapter to
the wall outlet and the DC jack
on the back panel of the unit.
Push button
to release
plug head
B A C K U P B A T T E R Y
The iBTW23 ships with a CR2450 battery installed for backup to provide
continuous alarm operation and clock settings in the event of a power failure.
Remove the pull tab from the battery compartment on the bottom of the unit
before use. If a power failure occurs or the AC cord is accidentally
disconnected, the display backlight will not remain lit, but current time and
alarm time settings will be temporarily maintained. Otherwise, you must reset
the time and alarm settings.
Note: The Battery Low icon is located at the right side of clock display.
When the backup battery is low and needs to be replaced, the Battery
Low icon will flash. To replace, follow steps on the next page.
outlet
Release
Lock
Select AC prong
matching AC wall
outlet. Slide-in plug
head to firmly latch
on the AC adaptor.
3