Setting The Time: Time Sync & Manual; Setting The Time Manually; Time Setting - iHome iPL10 User Manual

SETTING THE TIME:
TIME SYNC & MANUAL

TIME SETTING

TIME SYNC
This unit is equipped with auto sync. By default, the unit will sync to the
time on your iPhone or newer iPod (iPod touch, iPod nano and iPod
Classic; older iPod models such as iPod mini do not support this feature)
whenever you dock it in the Lightning dock OR connect via the USB port
located on back of the unit. When successful, the updated time will
appear on the display. If sync is unsuccessful, try to sync again using a
different iPhone or iPod. If sync still doesn't work, set the time manually
(see below).

SETTING THE TIME MANUALLY

1. Press and hold the Time Set Button until "MAN" or "SYNC" flashes in the
display and one beep sounds. If "SYNC" is displayed, press the + or –
Buttons so "MAN" appears in the display, indicating manual time setting
mode.
2. Press and release the Time Set Button. The time will flash in the display.
3. Press the + or – Buttons to set the correct time (hold for rapid
adjustment). Make sure you are setting the time to the correct AM or PM
time. The PM indicator appears at the upper left of the display; there is no
AM indicator. NOTE: The time can be set to standard 12 hour time (AM
and PM) or to 24 hour time (sometimes called "military time"). To toggle
between 12 and 24 modes, press and release the
on top of the unit at any time during manual time setting mode.
4. Press and release the Time Set Button to confirm the current time setting
(two beeps will sound) and exit time setting mode.
Alarm Button located
5