S N O O Z E / D I M M E R O P E R A T I O N; Sleep Mode; Maintenance - iHome iBTW23 Instruction Manual

S N O O Z E / D I M M E R O P E R A T I O N

1. To program a custom snooze duration, during normal operation (when
alarm is not sounding) press and hold the Snooze/Dimmer Button until
the display flashes, then press the + and – Buttons on the unit to adjust
the snooze time to 1 - 29 minutes. Press the Snooze/Dimmer Button (or
no button within 10 seconds) to confirm and exit snooze duration setting.
Two beeps will sound.
2. Press the Snooze/Dimmer Button on the iBTW23 after the alarm sounds.
The alarm will be silenced and will come on again in about 9 minutes
(default). You may repeat this cycle several times during the one hour
alarm cycle.
3. During normal operation (when alarm is not sounding), press the
Snooze/Dimmer Button to control the brightness level (8 steps, high to
low and o settings) of the LCD display.
S L E E P M O D E
Sleep mode lets you sleep to your playing Bluetooth for the set sleep
duration, then turns the unit o . Press the Sleep Button as needed to cycle
to the desired sleep duration: 120, 90, 60, 30 or 15 minutes or OFF (turns unit
o ). Press the or Button on the unit to adjust sleep listening level (sleep
level volume is independent from normal volume levels). Press the Sleep
Button during sleep to view the remaining sleep time; press again to set
sleep to next (lower) sleep duration.
M A I N T E N A N C E
• Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered
finish. A cloth or other protective material should be placed between it and
the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials can
damage the surface of the unit.
10