Dual charging alarm clock with speakerphone and removable battery (23 pages)
Summary of Contents for iHome iBT21
Page 1
Bluetooth Wireless Dual Alarm Clock instruction manual...
Page 2
Introduction Thank you for purchasing the iHome iBT21. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit.
Page 3
FCC ID: EMOIBT21 FCC Radiation Exposure Statement IC: 986B-IBT21 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 4
Énoncé FCC FCC ID: EMOIBT21 Déclaration de la FCC relative à l'exposition aux radiations IC: 986B-IBT21 Cet équipement est conforme aux limites d'exposition aux radiations de la FCC RF fixées pour un environnement non contrôlé. Cet appareil est conforme à la section 15 des règlements de la FCC, son utilisation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences nuisibles et (2) cet appareil doit accepter toute interférence...
Table of Contents Included/ Meet Your iBT21..................... 1-2 Installing Clock Backup Batteries ..................3 The Display/ Setting Up the Unit/ Turning the Unit ON and OFF ..........4 Setting the Time........................5 Setting the Alarms/ Reviewing, Arming and Disarming Alarms ..........6 Resetting the Alarm to Come on the Next Day ...............6 Snooze Operation/ Sure Alarm ..................7...
Page 6
Included • iBT21 Alarm Clock • 100V-240V universal AC adaptor • 2 AA batteries • Stereo audio cable 2 AA batteries alarm clock power adaptor stereo audio cable...
Replacing & Installing Clock Backup Batteries The iBT21 uses 2 AA batteries (included) for backup to provide continuous alarm operation and clock settings in the event of a power failure. If the backup batteries have been installed and a power failure occurs or the AC adaptor is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained.
Using the The Display Bluetooth Indicator Alarm 1 & Alarm 2 Indicators AUX indicator Sleep Indicator Battery Low Indicator PM Indicator Wake to Indicator Time Display Alarm time AM/PM Indicator Year/Date Indicator Alarm Time/Date Display outlet Setting Up the Unit 1.
Setting the Time Using the 1. Press and hold the Clock Adjust Button (located on the back of the unit) until the time flashes in the display and a beep sounds. 2. Press and release the – or + Buttons to adjust the clock to the current time (hold to advance or reverse rapidly).
Setting the Alarms 1. By default, the unit selects the most recently linked Bluetooth device as your wake-to source. If no Bluetooth device is detected, the iBT21 will automatically default to buzzer alarm. See page 8 to setup your Bluetooth device.
Snooze can be pressed several times during the 1 hour alarm cycle. Sure Alarm The iBT21 has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of power failure.
Bluetooth icon will flash on the display, indicating the unit is in pairing mode. 3. “iHome iBT21” should appear in your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBT21” to connect it. If prompted for a passcode, enter “1234” on your device’s keypad.
Using the Pairing with a Different Device 1. When AC power is connected, the unit will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). To pair with a different device follow steps 1 - 4 under ”Pairing Your Device”...
Using the Playing Audio via Aux In 1. Connect one end of the included 3.5mm stereo audio cable to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device.
Using the Sleep Operation Sleep mode lets you sleep to your Bluetooth device until the unit shuts off at a selected time. It will send a ‘pause’ command to your device, too. (Only while the unit is in Bluetooth mode).
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 18
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free...
Battery Cautions and Tips • Only use the recommended/supplied batteries or equivalent • Use alkaline batteries for longer life • Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries • Insert batteries with proper polarity (+/–) as indicated •...
Resetting the Unit If the iBT21 is not operating properly, you may wish to reset the unit. To do so, unplug the AC adapter and remove the batteries from the unit. NOTE: You will then need to reset the time and any previously set alarms.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Need help?
Do you have a question about the iBT21 and is the answer not in the manual?
Questions and answers