iHome iBT22A Quick Start Manual
  1. Manuals
  2. Brands
  3. iHome Manuals
  4. Alarm Clock
  5. iBT22A
  6. Quick start manual

iHome iBT22A Quick Start Manual

Hide thumbs Also See for iBT22A:
Table of Contents

Advertisement

Quick Links

Setting the Alarms
1. By default, the unit selects the most recently linked Bluetooth device as your wake-to source. If no
Bluetooth device is detected, the iBT22A will automatically default to buzzer alarm. See page 8 to
setup your Bluetooth device.
Note: make sure you have an hour of audio on your Bluetooth device.
2. Press and hold the
Button until the current alarm time flashes in the lower part of the display and a
beep sounds.
Press the – or + Button to set the alarm time. Remember to set the correct AM or PM time.
3. Press the
Button (or if no button is pressed within 10 seconds). Two beeps will confirm alarm time
and exit alarm setting mode. The alarm will be armed and the corresponding alarm icon will appear.
4. To set Alarm 2 just follow steps 2 - 3 using the
Reviewing, Arming and Disarming Alarms
1. Once an alarm is set, it is armed and the lower part of the display will show the alarm time. If both
alarms are armed, the earliest alarm time will show.
2. To arm/disarm the alarm, just press the associated alarm button to toggle it on or off. If the alarm is
armed, the related alarm icon will appear in the upper part of the display.
Resetting the Alarm to Come On the Next Day
When the alarm is sounding, press the
day.
Using the
Button.
Button to stop alarm and reset it to come on the following
6
P11
iBT22A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iBT22A and is the answer not in the manual?

Questions and answers

Related Manuals for iHome iBT22A

Summary of Contents for iHome iBT22A

  • Page 1 Setting the Alarms 1. By default, the unit selects the most recently linked Bluetooth device as your wake-to source. If no Bluetooth device is detected, the iBT22A will automatically default to buzzer alarm. See page 8 to setup your Bluetooth device.

  • Page 2: Snooze Operation

    Snooze can be pressed several times during the 1 hour alarm cycle. Sure Alarm The iBT22A has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of power failure.

  • Page 3: Using Bluetooth: Pairing Your Device

    Bluetooth icon will flash on the display, indicating the unit is in pairing mode. 3. “iHome iBT22A” should appear in your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBT22” to connect it. If prompted for a passcode, enter “1234” on your device’s keypad.

  • Page 4: Pairing With A Different Device

    Using the Pairing with a Different Device 1. When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must turn off the Bluetooth capability of the already paired device.

  • Page 5: Playing Audio Via Aux In

    Using the Playing Audio via Aux In 1. Connect one end of the included 3.5mm stereo audio cable to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device.

  • Page 6: Sleep Operation

    Using the Sleep Operation Sleep mode lets you sleep to your Bluetooth device until the unit shuts off at a selected time. It will send a power off command to your device,too 1. Press the Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate it is in sleep mode.

  • Page 7: Consumer Product Safety Guide

    Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
  • Page 8 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time.

  • Page 9: Troubleshooting

    Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBT22A. • Make sure the Power is ON, indicated by “ON” appearing briefly on the display.

Table of Contents