iHome iBTW23 Instruction Manual page 8

U S I N G Q i W I R E L E S S C H A R G I N G
This unit will wirelessly charge Qi compatible wireless charging phones.
PMA wireless charging system is not supported.
CAUTION: Remove metal protective or magnetic case from phone before
charging. When charging phone, do not place magnetic-striped or other
metal objects on the charger. Doing so could damage the object or this
unit. Qi compatible phones with metallic looking finishes will charge
normally.
Center Qi compatible device with back side down on marked charging
target circle. Check the wireless charging indicator toward the bottom left
of the display.
Rapid blinking icon: Device is not charging properly. Reposition
device.
Slow blinking icon: Device is charging properly.
Solid icon: Device is charged (some devices do not support
this feature).
U S I N G T H E U S B C H A R G I N G P O R T
A 1 Amp USB port is located on the back of the unit for charging devices while
the unit is connected to AC power. Connect one end of a compatible USB
cable (not included) into the standard USB port on the unit and the other end
into the device you wish to charge. Some devices require higher amperage
USB charging ports. Monitor the charging status of your device. If the device
does not charge, you will need to use the charger that came with your device.
7